Mini bus pressure seat sensor for car seats
Touch point sensor,multi-used function,used for cars,taxis,GPS tracking device,safety belt etc.
It's occupancy sensor,can recognise if person on seats or not.
New design,a new product in the auto market,most popular
pressure seat sensor sample is available
Performance Parameters Table | |||||
Parameter | Condition | Sign | Numerical Value | Unit | |
Min | Max | ||||
Working Voltage | U working | 0 | 20 | V | |
Working Current | I Working | 0 | 50 | mA | |
Non-trigger resistance value | No load | Rx=R No load | 10.0K | Ω | |
Trigger resistance value | Bearing body | Rx=R Trigger | 0 | 100 | Ω |
Insulation impedance | No load | Rx=R No load | 10 | 20 | MΩ |
Specification | |||||
Material | PC | ||||
Material surface thickness | 0.188mm | ||||
Output Signal | Resistance<100Ω | ||||
Film thickness | 0.5+-0.1mm | ||||
Bottom glue | PET 3MDouble-sided glue | ||||
Enviroment Temperature | -15°C-80°C | ||||
Permanence | >150000 Time | ||||
Pressure range single-spot test(Special Poise) | 70g | 100%non-conducting | |||
130g | 100%conducting | ||||
Connector | Seal gum | ||||
To match as the seat | |||||
Sample policy: We can send you samples for testing,you just need to pay for the sample and the shipping cost.