Product Description
1. Frame welded, vibration to eliminate stress, high in rigidity, sturdy an durable. Hydraulic drive, swing beam, return of knife
beam is smooth and prompt by accumulator or nitrogen cylinder, stead & reliable perfoman.
2. The position of low blade can be adjusted to ensure the epuilibrium of the gap after regrinding. the protable and prompt
adjusted of the blades gap, the value of gap is indicated by dial, positioning reliable.
3. Setting the backgauge by motor. The displessly devices used to the backgauge value and the shearing times are on the front of
the machine.
4. The stroke of knife or cbeam can be adjusted steplessly, conveniently an fast.
5. Preselection of single or continous strokes. Preselection of cutting number and cutting strokes
beam is smooth and prompt by accumulator or nitrogen cylinder, stead & reliable perfoman.
2. The position of low blade can be adjusted to ensure the epuilibrium of the gap after regrinding. the protable and prompt
adjusted of the blades gap, the value of gap is indicated by dial, positioning reliable.
3. Setting the backgauge by motor. The displessly devices used to the backgauge value and the shearing times are on the front of
the machine.
4. The stroke of knife or cbeam can be adjusted steplessly, conveniently an fast.
5. Preselection of single or continous strokes. Preselection of cutting number and cutting strokes
Specification
Specification | Shear Thickness | Shear Width | Shearing Angle | Number of Stroke | Backgauge Rang | Motor Power |
mm | mm | (° ) | min-1 | mm | kw | |
QC12Y-4×2500 | 4 | 2500 | 1° 30 | 20 | 20~600 | 4 |
QC12Y-4×4000 | 4 | 4000 | 1° 30 | 18 | 20~600 | 5.5 |
QC12Y-6×3200 | 6 | 3200 | 1° 30 | 14 | 20~600 | 7.5 |
QC12Y-6×5000 | 6 | 5000 | 1° 30 | 10 | 20~800 | 11 |
QC12Y-8×2500 | 8 | 2500 | 1° 30 | 14 | 20~600 | 7.5 |
QC12Y-8×4000 | 8 | 4000 | 1° 30 | 8 | 20~600 | 7.5 |
QC12Y-8×6000 | 8 | 6000 | 1° 30 | 6 | 20~800 | 15 |