Variable Speed ZX32GV Drilling and Milling
High precision grinding all steel spindle.
High Strength with square column.
Good strength gear grinding,low noise.
Head-stock tilts left and right.
Wide electrical box, easy operation.
High precision manual feeder.
Depth ruler, easy operation and read.
Specification | ZX32G | ZX32GV |
Max drilling capacity | 32mm | 32mm |
Max tapping capacity | 16mm | 16mm |
Max face milling capacity | 63mm | 63mm |
Table size | 700×190mm | 700×190mm |
Spindle taper | MT3/R8 | MT3/R8 |
X-axis travel | 410mm | 410mm |
Y-axis travel | 205mm | 230mm |
Z-axis travel | 310mm | 380mm |
Spindle travel | 85mm | 75mm |
T-slot size | 12mm | 12mm |
Spindle speed range | 95-1420rpm | 95-1420rpm |
Headstock tilt left and right | 90 degree | 90 degree |
Column size | 150×130×690mm | 150×130×690mm |
Base size | 550×340mm | 542×340mm |
Max. distance from spindle center to column | 203mm | 214mm |
Max. distance from spindle center to table | 336mm | 400mm |
Motor power | 750w | 750w |
N.W/G.W | 170/205kgs | 182/215kgs |