Features:
1.Compact, versatile combination machine.
2.Adjustable height drill/mill head increase capacity.
3.Fine feed handle and clutch for precision milling.
4.Headstock provides two step of feeds.
5.Spindle is supported by high precision bearing.
6. T-slot cross slide.
7.Adjustable grids for the slideway.
8.Power longitudinal feed allows threading.
9. High precision chuck.
Model | AT520/AT750 | |
LATHE | Distance between centers | 500mm/750(20"/29-1/2") |
Dial calibration on crossfeed | 0.05mm(0.002") | |
Dial calibration on leadscrew | 0.05mm(0.002") | |
Headstock taper | MT4 | |
Lathe chuck mount | Bolt-on | |
Spindle bore | 26mm(1") | |
Spindle speeds | 6 steps (160-1600rpm) | |
Swing over bed | 300mm(12") | |
Swing over work table | 170mm(6-3/4") | |
Thread pitch on processing | 0.5-3mm | |
Thread kinds on prodessing | 14(20) | |
Tailstock taper | MT3 | |
Z-axis working travel | 355mm(14") | |
X-axis working travel | 200mm(8-1/2") | |
Power feed(X-axis) | Yes | |
Power feed(Y-axis) | Yes | |
Table size | 150x425mm(5-7/8"x16-3/4") | |
MILL/ DRILL | Head rotation | 360° |
Head travel | 80mm(3") | |
Spindle center to support column | 310mm(12-1/8") | |
Spindle to table distance(Min-Max) | 240-32mm(9-1/2"-12-5/3") | |
Spindle speeds | 9 steps(315-2000rpm) | |
Spindle taper | MT3 | |
Tool size limits | 25mm(1") | |
OTHERS | Motor power | 550w(3/4HP) |
Packing size | 1170(1470)x580x980mm |
You may find the accessories as you like: