Features:
Supersonic frequency hardened and accurate grinded bed way.
12 steps of spindle speed.
52mm spindle bore
2.4kw(3HP)main motor power
Foot brake giving rapid braking
Lathe has scream button
Inching turning spindle is facilitate to shift gears ,load or unload workpieces
Special designed chip pan easily to remove chips
The lathe has safety switch to break power automatically when changing gears or belts
Specification | GH1340W | GH1440W | |||
General Capacity | Max.Swing.over bed | Φ330mm(13") | Φ356mm(14") | ||
Max.Swing.over cross slide | Φ185mm(7-7/25") | Φ210mm(8-5/8") | |||
Max.Swing.over gap | Φ480mm(19") | Φ506mm(20") | |||
Bed width | 260mm(10") | ||||
Distance between centers | 1000mm(40") | ||||
Spindle | Taper of spindle bore | MT5 | |||
spindle bore | Φ40(1-1/2") | ||||
Steps of spindle speeds | 12steps | ||||
Range of spindle speeds | 40-1800rpm | ||||
Spindle nose | D-4 | ||||
Threading and Feeding | Metric thread range | 0.45~7.5mm(22kinds) | |||
Inch screw thread range | 4~112TPI(40kinds) | ||||
Range of longitudinal feeds | 0.03-0.688mm(0.0011-0.0271" in/rev) | ||||
Range of cross feeds | 0.015-0.220mm(0.0003" -0.01" in/rev) | ||||
Leadscrew | Diameter of leadscrew | Φ22mm(7/8") | |||
Pitch thread of leadscrew | 4mm(8T.P.I) | ||||
Tailstock | Travel of tailstock quill | 120mm(4-3/4") | |||
Diameter of tailstock quill | 45mm(1-25/32") | ||||
Taper of tailstock quill | MT3 | ||||
Power | Main motor power | 2.4(3HP) | |||
Coolant pump motor power | 0.04(0.055HP) | ||||
Overall dimensions of lathe(L×W×H) | 1900×740×1150mm | ||||
Packing size of lathe(L×W×H) | 1970×760×1460mm | ||||
Net Weight | 960kgs | ||||
Gross Weight | 1090kgs |
You may find the accessories as you like:
Standard Accessories: | Optional Accessories: |
3 Jaw Chuck | Taper Turning Attachment |
Change Gears Set | Live Center |
Chasing Dial Indicator | Work Light |
Reduction Sleeve | Leadscrew Guard |
Dead Centers | Digital Readout |
Full Length Splash Guard | Quick Change Tool Post |
Coolant System | Chuck Guard |
Brake System | Digital Readout (2 Axis, 3 Axis) |
4 Jaw Chuck | Drill Chuck + Drill Arbor |
Face Plate | |
Steady Rest | |
Follow Rest | |
Tool Box & Tools |
Details about the machine: