marine garde 5052 5754 5083 plain aluminum sheet plate 5mm thick
Aluminum Alloy:
5052/5054/5754/5083/5182/5456
Aluminum Temper:
O/H12/H14/H16/H18/H22/H24/H26/H32/H34/
H36/H111/H112/H116/H321/T3/T4/T5/T6/T651
Specification:
Thickness: 0.2mm~350mm
Width:200mm~2300mm
Length:≤12000mm
5052/5A02 Aluminum Features:
Anti-rust alloy, cannot be heat treated, not very high strength but good formability, anti-rust quality and welding quality
Application of 5052 auminum sheet:
Pipe and fuel tanks for aroplane fule and oil,parts for all kinds of sea and road equipment, cold stamping parts,cover for electric appliance
5754 aluminum Features:
better strength than 5052, good anti-rust quality,formability and welding quality
Application of 5754 aluminum sheet:
Most popularly used in viechile parts industry and tank production industry, also used for protective screen on highway
5083 alloy Features:
With Mg as its main minor ingredient, 5083 has good anti-rust quality, formability, good cold workability, welding quality and better strength than 5754
Application of 5083 alloy:
Alloy with best prosperous future, used in boat, naval craft, viechle, high pressure storgae devices, refrigerating device, TV tower,armour device etc
5182 alloy Features:
Similar mechanical property as 5A02 but better welding quality than 5A02
Application of 5182 allloy:
Especially for welding use and also all use of 5083 boat, naval craft, viechle, high pressure storgae devices, refrigerating device, TV tower,armour device etc
5456 aluminum Features:
Similar mechanical property as 5083 but better strength
Application of 5456 aluminum:
Popular alloy in US to replace 5083, Used in boat, naval craft, viechle, high pressure storgae devices, refrigerating device, TV tower,armour device, oil drilling platform etc
Alloy | Wrought aluminum alloy composition limits (% weight) | |||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn |
| Ti | Zr | Limits†† | Al | |
|
|
|
|
|
|
|
|
|
|
|
| Each | Total |
|
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | — | 0.25 | — | — | — | 0.05 | 0.15 | Remainder |
Mechanical Properties: Elongation δ5 (%): ≥ 2 | ||||||||||||||
Alloy | Wrought aluminum alloy composition limits (% weight) | |||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn |
| Ti | Zr | Limits†† | Al | ||
Each | Total | |||||||||||||
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | — | 0.1 | — | — | — | 0.05 | 0.1 | Remainder |
Mechanical Properties: Elongation δ5 (%): ≥ 12 | ||||||||||||||
Alloy | Wrought aluminum alloy composition limits (% weight) | |||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn |
| Ti | Zr | Limits†† | Al | ||
Each | Total | |||||||||||||
5083 | 0.4 | 0.4 | 0.1 | 0.40 ~ 1.0 | 4.0 ~ 4.9 | 0.05 ~ 0.25 | — | 0.25 | — | 0.15 | — | 0.05 | 0.15 | Remainder |
Mechanical Properties: Elongation δ5 (%): ≥ 12 Elongation δ10 (%): ≥ 20 | ||||||||||||||
Alloy | Wrought aluminum alloy composition limits (% weight) | |||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn |
| Ti | Zr | Limits†† | Al | ||
Each | Total | |||||||||||||
5182 | 0.2 | 0.35 | 0.15 | 0.20 ~ 0.50 | 4.0 ~ 5.0 | 0.1 |
| 0.25 |
| 0.1 | — | 0.05 | 0.15 | Remainder |
Mechanical Properties: Elongation δ5 (%): ≥ 15 | ||||||||||||||
Alloy | Wrought aluminum alloy composition limits (% weight) | |||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn |
| Ti | Zr | Limits†† | Al | ||
Each | Total | |||||||||||||
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6 ~ 3.6 | 0.3 | — | 0.2 | Mn+Cr: 0.10~0.6 | 0.15 | — | 0.05 | 0.1 | Remainder |
Mechanical Properties: | ||||||||||||||
v Aircraft, automobile, train
v Building wall, ceilings, roofing, furniture cabinet, lighting plate
v Shipping plate, solar reflective plate, Corner protector, insulation material
v Beverage bottle, cap, ring-pull, cosmetics shell and cover
v Aluminum tread/embossed plate, quenched and pre-stretched plate
v PS base plate, CTP base plate, Signs, nameplate
v Electrical products shell, engineering machinery plate
v Aluminum reefer containers and special containers etc
v Spinning, Auto etc.
FAQ
Q: How to contact your company?
A: With TradeManager or Skype or Email or the other ways we have written upon.
Q: Can you give us a quotation right now?
A: Please give us detailed technical data. Then we will make a design and quotation for you as soon as
possible.
Q: What is the MOQ (Minimum Order Quantity)?
A: 1 ton
Q: Do you provide your products catalogue?
A: Of course, I will send it to your E-mail if it's convenient to you.
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, Western Union, MoneyGram etc.
Q: Can I get some free samples from you?
A: Yes, free samples will be sent to you on freight at destination.
Q: Do you supply other products?
A: Yes, our main products include Aluminum Sheet, Aluminum Coil, Color Aluminum, Mirror Aluminum,
Embossed Aluminum, and Aluminum Foil, Aluminum Circle, Aluminum Tube etc.
At the same time, different dimension can be customized .Welcome your inquiry.
More about us !