5083 ALUMINIUM ALLOY COLD DRAWN COILS
1.Specifications
1, Material:Pre-treatment material
2, Paint: 70% PVDF from PPG or Valspar;
3.Pretreatment: the raw aluminum has to be washed by acid, and chromized. After it is dried out, it will be covered by oxide film to heighten the adhesion.
4, Colors: Can do as your requirement We are the first one to pass CTC of national testing certification center of building materials.
5. Good quality for Benting:
6. Polyester coating ingle coating, one layer, 18μm; double coating, two layers, 25~27μm. PVDF coating: two layers of PVDF coating, at least 25μm, and if required, it will be covered by another layer of varnish, 35μm in total.
product | thickness | alloy | temper |
aluminiumcoil,foil,strip, ,circle | 0.006mm-200mm | 1070 1060 1050 1100 1200 3003 8011 3005 5005 3105 | H18 H26 H14 H24 H22 O |
Substrates: | Aluminium (1100, 3003, 3004, 3105, 5006, 5052, 8011, etc), etc. |
Thickness: | 0.08-1.5mm |
Width: | <1800mm |
Coils core diameter: | 150mm ,405mm, 505mm, 508mm, 510mm |
Coating thickness: | PVDF >=25micron POLYESTER>=18micron |
Color standard: | E < 2 or it is not obvious by eyeballing |
Pencil hardness: | > 2HB |
Coating adhesive: | not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993) |
Bend stength: | >100 times |
Boiling point: | no any distortion and color change (in the 99 more or less 1 degree water, then cooling 2 hours) |
Corrosive: | surface deep in the 5% muriatic acid and 5% NaCL, interior deepin the 2% muriatic acid and 2% NaCL, after 48 hours, no change |
Aluminum coil |
| |||
Alloy | Thickness(mm) | Width(mm) | Temper | DC or CC |
1050,1060,1070,1100,1235,1145 | 0.2-4.0 | 20-1500 | O,H12,H22,H14,H24,H16,H26,H18 | DC, CC |
4.0-12.0 | 1000-1900 | H111,H112 | DC | |
3003,3004,3105 | 0.2-4.0 | 20-1500 | O,H12,H22,H14,H24,H16,H26,H18 | DC, CC |
4.0-12.0 | 1000-1900 | H111,H112 | DC | |
5052,5083,5754,5005 | 0.2-4.0 | 20-1500 | O,H12,H22,H14,H24,H16,H26,H18 | DC |
4.0-12.0 | 1000-1900 | H111,H112 | DC | |
8011 | 0.0065-0.2 | 20-1200 | O,H22 | DC,CC |
ID | 505mm,75mm,150mm etc. | |||
|
|
| ||
|
| |||
Application | Mainly in printing(PS plate base), Aluminum-plastic composite panel base, construction, decoration, capacitor, cover material, deep drawing products, refrigeration, air conditioner, automobile etc. | |||
MOQ | 5mt | |||
Contact Person | Name: Ms Serena Guo | |||
Mobile: +86 18301953841 | ||||
Office Tel: +86 021 67652881 | ||||
2.Full of set of process.
Professional slitting line,to divide the coil into any width ,with accuracy +-0.02mm;
Professional cutting line,to make sheet with any length;
Embossed line could process aluminum coil with max thickness (1.0mm of A5754H24);
Brushing line,to make the coil brushed as required;
Full-set processing for food-grade aluminum coil and sheet.
3.Usage of the aluminum coil.
What use for please confirm with me!
4.Photo of product
5.Photo of equipment