Fanshine Wireless Security Alarm Outdoor Siren 433Mhz
Function Characters:
1. Unique,elegant,water proof;
2. Microcomputer digitally controlling, Steady function, super quality;
3. Connect 10 wireless alarm host at most;
4. Inbuilt circuit for charging back-up battery,
5. AC/DC both available which change automatically.
6.Small consumption when not alarming,low voltage
Checking automatically,charging power automatically all hanging installation;
Technical parameter:
1,Power:110~240VAC,50Hz
2,Consumption when not alarming:≤40 mA
3,Consumption when alarmg:≤450 mA
4,Alarming last for 3 minutes
5,Signal receiving distance:≥150M ( hollow space )
6,Alarming volume:≥105db
Installation:
1,Press power supply green button after connect power;
2,Study siren to wireless alarm host;
3,Disconnect power after studying,choose suitable outdoor place install, then connect power;
Study to wireless alarm host:
1,Connect power supply firstly,press red studying button and you will notice the alarming lights on. Then press the “”from LCD alarm host,and then disarm by LCD alarm host, you would notice the alarming lights sparkle for 5 times then go off,it means successfully in learning.
2,one wireless outdoor siren can connect to 10 wireless alarm host at most;
3,If you want to delete sensor,the step is as follows: Press the red studying button for 10 seconds, you will notice the alarming lights would be on once then go off immediately, it means successfully in delete.(Notes: This step will delete all which connected to alarm host)
4,When alarm host alarming, the wireless siren will automatically loudly alarming up to 3 minutes, if you hope it stop alarming, you can make disarming from wireless alarm host.
5,If back up battery’s voltage under 5VDC,the charging power light would be on, and it will being to charge battery automatically for about 20 hours, it means finished charging power if this charging power light go off.
Thanks for your time of viewing.
Please contact me freely to get more information.