Fanshine Home Automation Alarm Emergency Panic Button Detector
PRODUCT INTRODUCTION
This product is emergency button detector. Hereinafter be called the detector. It has emergency alarm function. Once the emergency incident occurs, the detector will be triggered to transmit the signal to the host by the wireless way so as to achieve the effect of emergency call. This product is suitable for all the places where the security protection is needed, such as residential areas, companies, shopping malls, hospitals, banks, guard post etc.
MAIN FEATURE
Double alarm types, button type and pull type Compact appearance, can hang it up
Anti false alarm design
Zero standby power consumption Low-battery detection
MCU coding, compatible with 2262/1527 Anti RFI(20V/m-1GHz)
SMT process
TECHNICAL SPECIFICATION
Operating voltage: 3V (1*CR2032 button cell)
Standby current: 0uA
Alarm current: ≤25mA
Alarm indicator : red LED
Low-battery indicator: rapid flash of red LED Coding mode: MCU coding with 2262/1527 optional
Transmitting frequency: 315M or 433M Transmitting distance:50m-100m(open area) Alarm type: button type and pull type Temp.: -10℃~+50℃
Humidity: < 80%RH (no congelation)
Dimension:36*58*15mm
ALARM SETTING
1)Set the jumper according to the alarm host (refer to jumper setting).
2)Set the host at the learning mode.Press and hold the alarm button for 2 sec. to let the host learn.
3 )Function test follows:
a. Press and hold the alarm button to keep red
Button test: Press and hold the button to do the function test.
Pull test: Gently pull the switch out to do the function test, and then push it back to the original place.
LED on, and the host responds, which indicates successful setting (refer to picture 1).
b. Remove the pull switch to keep red LED on, and the host responds. After red LED flashes for 5 sec., the alarm signal will be transmitted once again.(refer to picture 2).
JUMPER SETTING FIGURE
1 Code pattern jumper
2 Oscillation resistance jumper
3 Data code jumper
Thanks for your time of viewing.
Please contact me freely to get more information.