Specifications
SD7H15 709 PV10 pulley ac compressorSANDEN 7H15 709 Auto a/c compressor
SANDEN709 7H15
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
SD7H15 709 ac compressor pv10 pulley
Specification:
Model number: INTL-C126
Car name: Universal
Compressor type: SD7H15
Clutch DIA: 123mm
Grooves: PV10
Voltage: 12V
Used 6" hose fitting
Special Notes:
OEM:
SD7H15
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced