Home Appliance Air Conditioner from China Supplier with CE Certification
Nature’s most efficient means of cooling is through the evaporation of water. JHCOOL JH165 portable air cooler works on the principle of heat absorption by moisture evaporation. It also happens on human skin, the body sweat to cool temperature down.
JHCOOL JH165 portable air conditioning is an environmental protection air conditioning which set to ventilation, cooling, dedusting and other functions in one. It through water evaporation to make cooling instead of compressor. The power consumption of JH165 portable air cooler is only 1/8 of traditional air-conditioning with advanced technology. In addition, it can be used in internet cafes, base station, factory, supermarket etc.
Item | JH165 solar air conditioner | |
Electric Fan | Power | 160w |
Speed | 3 | |
Phase | 1 | |
Fan | Single unit cover area | 30-35sqm |
Airflow (M3/H) | 4500 | |
Fan type | Axial Portable Air Cooler | |
Pressure | 45Pa | |
Noise | 61dBA | |
Cabinet | Cabinet | plastic |
Discharge type | side | |
Dimension (mm) | 712*466*1180 | |
Packed size(assembled)mm | 715*470*1230 | |
Loading quantity (assembled) in 40HQ | 149pcs | |
Water Tank | 40L | |
Water Consumption | 3-5 L/H | |
Net weight | 20kg | |
Gross weight | 24.5kg | |
Control | Control type | LED |
Remote | yes | |
Control Type | LED | |
Over load protection | Yes | |
Pump Protection | Yes | |
Temperature display | Yes | |
Ionizer | Yes | |
Water inlet | Manual & Auto |
Advantages Of JH165 Portable Air Cooler
1. Low carbon green product, environmentally friendly, no CFC'S, no damage to the Ozone layer
2. Super energy-saving, only cost 1/10 electricity than air con
3. Less than 1/2 the price of air conditioning
4. Vent cooling, no air recirculation
5. Low purchasing cost, Low power consumption, Low installation cost, Low maintenance cost
Higher Quality Standard Of JH165 Evaporative Air Cooler
1. Water proof motor
2. Water pump protection function against low water level
3. Aluminum material cabinet motor, 100% copper wire
4. Long lifetime water pump
5. Unique designed float valve, available water pressure from 0 bar to 5.5bar
6. Auto swing, remote control, auto timing off
7. Optional auto clean function, To change water every several hours
JH165 Portable Air Cooler Packaging & Shipping
Dimension (mm): 712*466*1180
Packed size(assembled)mm: 715*470*1230
Loading quantity (assembled) in 40HQ: 149pcs
JHCOOL JH165 portable air cooler is very popular in outdoor area or offices, where standard air conditioner isn’t practical, like car repair stores, outdoor coffee shops, outdoor sport places, exhibition, ect.
Professional leads to perfect!
Our company specializes in manufacturing evaporative cooler only. After years fast development, we are leading evaporative cooler technique in the world. Now, in the world, we produce the most various kinds of evaporative coolers. Our products line cover standard unit, industrial unit, window unit, mobile unit and home unit.
Our products own CE, ISO and CCC certificates.
Fujian Jinghui Technology Co.,Ltd specializes in R&D, manufacturing and marketing air cooling systems. After several years of rapid growth, JHCOOL becomes the leading suppler of quality evaporative cooling products to residential, commercial and industrial customers worldwide. For five consecutive years, it achieved the biggest sales volume of inverter type evaporative air cooler in the world. We are success in both domestic and overseas. In China we establish approximately 30 sales and service offices, in addition we expend our market all over the world, such as Oceania, North America, Middle East, Europe, Africa and Southeast Asia.
JHCOOL evaporative air cooler factory
Q: What advantages does evaporative cooling have compared to refrigerated cooling systems?
A: Evaporative cooling will provide substantial energy savings over refrigerated air units. The simplicity of the design allows low maintenance requirements. The evaporative cooler will provide fresh, filtered air. The outside air that has been cooled will blow the stale inside air out. With the substantial savings on energy and the air constantly changing, the industrial / commercial evaporative cooler is ideally suited for area cooling or spot cooling in factories, laundries, churches, schools, agri-businesses, restaurants and many other applications.
Q: How much water do I put in?
The amount of water required will vary depending on the size of the unit you own. To help determine the correct level, each evaporative cooler is equipped with a water level indicator. It can be found on bottom sump of the unit. Add water until the indicator shoes that the water reservoir is filled. Water will leak from the unit if it is overfilled.
Q: At start-up, the air has a slight odor?
Occasionally an evaporative cooler may give off a slight odor when first put into use. To eliminate this odor, run the unit for an hour, drain all the water from the tank and add fresh water. If odor persists repeat the above procedure until it is eliminated.
Q: How often do I have to fill the mobile unit?
The length of time will vary depending on the dryness of the air and the speed at which the cooler is running. Typically water supplied should last from for one day, or half day, because we design the tank for 8 hours use or 4 hours consumption.
Q: Can the pump run dry?
The unit can be safely run without water in the tank. It will cause no harm to the cooler or the water pump. Never choose cooler with submersible pump that usually used in glass fish bowl. It will burn while lack of water and cause danger.
Q: How do I clean my pads?
Remove the back or top of the unit following the instructions in the operating manual. Note: Be sure to unplug the cooler before you access the inside of the unit. Remove the pad from the unit or back panel. Rinse the pad with fresh water using a hose or soaking the pad in a tub until the mineral deposits disappear. You may want to change the tub water occasionally to accelerate the cleaning process. Allow the pad to sun dry. Reattach the pad to the cooler back panel or reinstall inside the cooler. Replace the top or back panel on the cooler.
Q: How often do I clean my pads?
Pads should be cleaned at least once a season prior to storing for the winter. In hard water areas, cleaning may be required more frequently. Periodic, visual examination is required. Remove the back or top of the cooler following the instructions in the operating manual. Look at the pads. If they show signs of heavy mineral deposits they will need to be cleaned.
Note: Be sure to unplug the unit before you access the inside.
If you are interested in our products, please be free to contact me.
Ken Xiong
Mobile/WhatsApp/WeChat: 0086-15959108526
air cooler, portable air cooler, evaporative air cooler |