EN1075A/B
Polyurethane Adhesive for Food Package
Instruction
EN1075A/B is a common two-component ethyl acetate soluble polyurethane adhesive designed for general structure. This product is suitable for the lamination among PE, PP, PET and PA. It has good performance of lamination.
Function
Lamination film has the features of good initial adhesion, high transparency, high peeling strength, etc.
It has a good performance of wetting to the film, and it’s especially good at coating process.
It conforms to the Food Hygiene Law of the P.R.C.
It conforms to the Adhesive regulations for food packaging of China National Adhesives Industry Association.
Physical Nature
Chart 1.The Physical Nature of EN1075A and EN1075B
Item | EN1075A | EN1075B |
Appearance | Light yellow transparent liquid | Colorless or light yellow transparent liquid |
Solid Content (%) | 75±2 | 75±2 |
Viscosity(mPa• s,25℃) | 2500±500 | 2000±1000 |
Solvent | EAC | EAC |
Mixing Ratio(Weight) | 20 | 4 |
Chart 2. The Changes of Solid Content and Viscosity during the Dilution
EN1075A(kg) | EN1075B (kg) | EAC(kg) | Solid Content (%) | Viscosity,seconds (25℃,Zahn Cup #3) |
20 | 4 | 48 | 25 | 12~13 |
20 | 4 | 36 | 30 | 13~14 |
20 | 4 | 27.4 | 35 | 14~15 |
20 | 4 | 21 | 40 | 16~17 |
Attention: The moisture of EAC, no more than 300ppm, is the most suitable solvent for dry lamination. In addition, MEK, TO, ACETONE etc., whose moisture is no more than 300ppm, also can be used as solvent. It will reduce The effective content of hardener when there is active hydrogen, such as alcohol, amine, in the solvent.
Material object:
Yellow transparent liquid
Package:
The white drum is for 20KG, and the blue one is for 200KG.
Application:
aluminized film
Freight transport :
Professional loading to keep the goods safety.
Port: Shanghai
We usually take part in exihibitions all around the world.
If customers could supply us samples of their films, we also would like to do the primal test, and then provide a total solution to customer.
1. What information is needed for adhesive recommendation?
Please let us know your basic requirement: your laminating structure and application, water-boiling or retorting treatment or not, the laminator speed.
More details will be much helpful like dry coating weight, the adhesive you are using now, curing room condition and so on.
2. What information is needed for quotation quickly?
Please let us know your destination port, normal quantity, and payment term you like, then we can mail the quotation to you in 12 hours since receiving your enquiry.
3. What about the payment term?
Normally we accept the TT and L/C.
Normally the cargo can be ready for delivery in 7~15 days after we get the deposit.
The FCL cargo can be shipped in 7 days since we received the TT payment or L/C.
The LCL cargo can be shipped in 14 days since we received the TT payment or L/C.
4. What about the packaging style in container?
We will pack the adhesive pails into pallet.
Normally one 20 container can load 10 pallets. Between two pallets, we will add the airbag to avoid the shaking.
Or we can pack them as customers request
5.How about the sample testing?
After confirming the adhesive code with customers, we can provide free sample ,but customers charg the shipping cost.
We supply the PU laminating adhesives/PU Resin for fleible packaging as following: solvent-based, solvent-free, water-based and alcohol-soluble laminating adhesives.
For adhesive catalogue, brochure, TDS and MSDS, Contact now!