Facory deirect sales
The environmental protection Waterborne neutral silicone glass sealant
1. Specially suitable for home decoration.
2. Stable and flexible from 5°C -50°C and can keep sealing for at least 10 years.
3. Adheres to a range of common building materials and finishes.
4. Cures to a strong, flexible seal capable of withstanding movement in and around the joint.
5. Non-slumping, can be used in vertical and overhead joints.
6. Easy to use – one part, no mixing required.
7. Can be applied in any season. Anti-cold, heat, weather, water and mildew
8. Resistant to weathering, ultra-violet radiation, vibration, moisture, ozone, temperature extremes, airborne pollutants, cleaning detergents and many solvents.
9. Excellent unprimed adhesion to a wide variety of construction materials and building components
10. Fast curing in 24 hours in summer and 48 hours in winter.
APPLICATION TEMPERATURE: +5°C to +50°C
1. Cleanse with a cleaning agent, to keep the substrate surfaces completely clean(JOIN LEADER also provide the cleaning agent for your convenience).
2. Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. (Notice that the two can’t be mixed use together, and the second cloth will be better purified cotton and no picking.)
3. For better appearance, cover outside of joint areas with masking taps before application.
4. Cut nozzle to desired size and extrude sealant to joint areas.
5. Tool immediately after sealant application, make it smooth and remove masking tape before sealant skins.
Glass Structural Silicone Sealant is not adapted to structural fitting and following situations:
1. To all surfaces that bleed oil, plasticizers or solvents such as wood immersed in oil, oil crack filler, and some uncured or sulfur zed fat and to surface where is wet;
2. To the substrate that the surface temperature exceeds +50°C or apply at temperatures below 5°C;
3. Use in the manufacturer of IG units;
4. To closed or confined areas where sealant cure may be inhabited by lack of air (silicone sealant need the water in the air to cure);
5. To use in construction or sealing of aquariums;
6. To the circumstances as immersed in water for a long time;
7. Shall not be applied on lead, zinc and galvanized steel plate.
8. To the painted surfaces, may cause seal failure as the paint cracking or stripping;
9. To the places that easily suffer mechanical clash;
10. Use in the IG curtain wall sealing.
11. Contact with Neutral silicon sealant.