New design clear liquid epoxy resin made in China 
PRODUCT DESCRIPTION
clear liquid epoxy resin is a general purpose cyanoacrylate adhesive that provides a fast, strong and permanent bond to almost all non-porous surfaces.
clear liquid epoxy resin is designed to bond most metals, plastics, elastomers and will bond ceramics, wood and textiles among others.
clear liquid epoxy resin cures times vary according to the materials, but most combinations are very fast, fixing in 2~8 seconds.
FEATURES
Bonds in seconds—therefore faster production on assembly line
Excellent bond for a variety of surfaces
Ready to use product, no mixing required
Adequate chemical resistance
Small area is sufficient to get strong bond
Solvent-less adhesive
Bonds plastic, metals and rubbers, china and dissimilar substrates
TECHNICAL DATA
As Supplied – tested at 23 °C ±2 °C , RH50%±5%:
Item | Data |
Aspect: | Clear Transparent Liquid |
Gravity (g/cm 3) | 1. 0 ~1. 1 |
Viscosity (mPa.s) | 30~50 |
Service Temp ( °C) | -30 ~+80 |
Application Temp ( °C) | +5~+50 |
As Supplied – tested at 23 °C ±2 °C , RH 50%±5% :
Cured Aspect | Ultra Transparent Solid |
Gravity, g/cm 3 | 1. 0 ~1. 1 |
Cured Speed (seconds) | 9~15 Metal-Metal |
2~5 Plastic-Plastic | |
1~4 Rubber-Rubber | |
Full Cure Time (hours) | 24 |
Hardness (Shore A) | 30~65 |
Shear Strength (MPa) | ≥10 |
Elongation at break (%) | ≤10 |
Volume Shrinkage (%)
| ≤8 |
Linear Shrinkage (%) | ≤5 |
Adhesion Properties | non-destruction |
Water Resistance | Good |
APPLICATIONS
clear epoxy resin is the most common super glue in use, it can work best on hard plastics, metal, rubber, glass, ceramic, china, fabric, leather, vinyl and wood.
clear epoxy resin is ideal for fixing precious and semi-precious stones in jeweler. Useful for repairs of domestic electrical appliances like mixture, grinders, irons, etc.
clear epoxy resin is also used widely in the electronics industry and the white goods industry.
APPLICATION LIMITS
water clear epoxy resin for crafts making is not suitable for adapting to structural fitting and following situations:
1. To all surfaces that bleed oil, plasticizers or solvents such as wood immersed in oil, oil crack filler, and some uncured or sulfurized fat and to surface where is wet;
2. To the substrate that the surface temperature exceeds +50°C or apply at temperatures belo w 5°C;
3. Use in the manufacturer of IG units;
4. To the painted surfaces, may cause seal failure as the paint cracking or stripping;
5. To the surfaces that with direct touch of food.
6. Do not use for structural glazing.
7. Not recommended for continuous water immersion applications.
8. Not recommended for use in below ground joints or trafficable
9. Joints where abrasion and physical abuse are encountered.
10. Not recommended for some plastics such as polyethylene or polypropylene plastics.
HOW TO USE water clear epoxy resin for crafts making
Surface must be clean, dry and free from grease and old glue.
Mask smooth surface to simplify clean up.
Apply to one surface only.
Apply suitable pressure on bonding substrates.
Clean off excess adhesive with acetone.
Working Corner
water clear epoxy resin for crafts makingSHELF LIFE
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and 25°C.
Worldwide Exhibition
ZHENGZHOU HANDINHAND GLUE CO., LTD
Tel.:86-371-66888880
Fax:86-371-69112502
M:+86-15638412227
Add.:Ninggu Industrial Zone, Zhengzhou City, Henan Pro, China
Zip:450000
Country / Regin : China ( Mainland )
Province / State : Henan
City : Zhengzhou
Skype:sls502glue
You can contact us by Email , Skype , Trademanager , Telephone or Mobilephone and etc.