Specifications
pva glue1.one part,flexible
2.bond glass/glass or glass/crystal
3.250ml/bottle
Kafuter K-3016 UV PVA Glue for Glass/Glass
Characteristics:
K-3016 is one-part, low viscosity UV curing modified acrylic adhesive which can be cure by expose to UV/Visible light of sufficient intensity.
Application:
Using for large area of glass to glass, or glass to crystal bonding.
Typical Properties:
| Test Item | UV Acrylic Adhesive K-3016 |
| Appearance | colorless or transparent liquid |
Tack free time(s) | 5s-125w Phillips UV lamp 10s-40w UV lamp |
| UV Fixture Time(s) | 180s-125w Phillips UV lamp 240s-40w UV lamp |
| Harness(Shore A) | 74 GB/T 531-1999 |
| Shear Strength(Mpa) | ≥6 PMMA/PMMA ASTM D-4501-01 |
ATTENTION:
1.This product is light sensitive, exposure to daylight, UV light and artifical lighting should be kept to a minimun during storage and handling.
2.For best peformance bond surfaces should be clean and free from grease.
3. Cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrates through which tha radiation must pass.
4. When the sorrouding temperature is too low, it would reach good result if pre-toasted or pre-heated to 30~40°c.
Packing Specifications:
250ml/bottle | 10bottle/box | 40bottle/case |
