Specifications
crystal glass coating1.one part,quick set
2.for glass/metal bonding
3.use with UVlight
4.10ml/50ml/250ml
Shenzhen Kafuter uv adhesive crystal glass coating
( For glass bonding,and glass to metal bonding)
Characteristics:
UV light curing adhesive is one-part, medium viscosity modified acrylic adhesive which can exposed to UV or visible light
Features: high bonding strength, can form a transparent film after cured, medium viscosity, and easy to use.
Application:
Apply in metal/glass bonding, or glass/glass bonding in artistic glass, glass basins, glass furniture, glass artifacts, and glass shells, etc.
Typical Properties:
Test Item | UV Light Adhesive |
Viscosity | 500~1500mpa.s |
Appearance | colorless or pale yellow liquid |
UV exposure | 1000mJ/cm² |
Cure Time(s) | 10~20s |
Shear Strength(mpa) | glass/stinless steel≥16 |
User's guide:
Kafuter uv light adhesive is recommended for bonding glass and metals.
First,the bonded surfaces should be clean and dry by removing the oil and grease.
this product is cured in 10~20s when exposed to mecury lamp with strength of 60mW/cm², or will reach a good result if first using high-power mecury lamp to get set in 3~5s, and then exposed to low-power mecury lamp in 5 mins.
Packing Specifications:
10ml/bottle | 10bottle/box | 100bottle/case |
50ml/bottle | 10bottle/box | 80bottle/case |
250ml/bottle | 10bottle/box | 40bottle/case |
if buy one bottle of UV Curing adhesive, we can offer a little flashlight for you for free as below: