Specifications
acrylic polymer emulsion1.two-part, transparent liquid
2.seal and pot in led components
3.bond hard-plastics
4.5kg/pairs
Kafuter K-8810W Price for acrylic emulsion acrylic latex emulsion acrylic polymer emulsion
Main Characteristics:
(1) Fast cure, quick set in several minutes
(2) Two-component, super strength, and impact resistance.
(3) Easy to use, and using in assembly lines.
Application:
Bond the hard-to-bond plastics, good adhesion to metals(except fo copper), magnets, ceramics, glass, etc.
Technical Properties:
| Appearnce | A: Transparent viscous liquid B: Transparent viscous liquid |
| Viscosity(cps, 25°c) | A: 4000±500 B: 4000±500 |
| Cure Time(min. 25°c) | ≤ 5 |
| Tensile Strength(steel×steel.mpa) | ≥18 |
| Impact Strength(kJ/m3) | ≥10 |
Packing Specifications:
2.5KG/Pairs, 15KG/Carton
Directions:
1.The uncoated surfaces should be clean and dry.
2. Squeeze out equal amount of glue from A and B part, and mix them thoroughly.(Don’t mix the glue with large quantity at one time)
3.Coating the adhesive on the surfaces
4.This product can be used at any temperature between -60°c~200°c
Attention:
1.Keep out of reach of children.
2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.
3.Store in dry and cool place, keep away from heating and fire.
