Product Name: Acid Silicone Sealant TT-998
Detailed Product Description:
1.General purpose acid silicone sealant.
2.Acetoxy Cure.
3.Good adhesion to most of the materials.
4.Quality stable.
5.Be available cartridge type.
Product Description:
Hantec TT-998 general-purpose silicone sealant is low modulus, elastic joint.
One component, cost effective silicone sealant.
Hantec TT-998 silicone sealant is temperature-resistant property constructions to
Its waterproof and airtight characteristics.
It is weather resisting and anti-ageing properties will not be degraded under the
Influence of rain, snow, or long time being illuminated by ultraviolet ray.
Features:
Easy to apply.
Non-Sag.
Available in a wide range of colors.
Can be applied in any seasons.
Cures to a strong, flexible seal capable of withstanding movement in and
Around the joint.
Quick curing with excellent adhesion to most of the materials.
Stable and flexible -20℃~110℃.
Technical Date Information:
As Supplied-Tested at 23℃±2℃. RH50%±5%. Aspect Tixotropic Paste. | |||
Total Cured Time: | 24Hours
| Gravity | 0.98~1.1 g/cm³ |
Skin Cure Time
| 5-20 min | Tack-free Time
| 15-30Mins |
Sag/Slump
| ≤1 mm | Extrudability
| ≥200ml/min |
Application Temp
| +5℃~+40℃ |
|
|
As Supplied-testing at 23℃±2℃,RH50±5% 7days. Hardness: 24H, Shore A≥8 Hardness: 7D, Shore≥ 15 | |||
PRODUCT INTRODUCTION
| |||
Elongation at the break
| ≥300%
| Depth of Curing
| ≥2mm, 24H |
Depth of Curing
| ≥6mm, 7D. | Modulus at 100% elongation
| ≥0.18 MPA |
Movement Capability Level
| 25%. |
|
|
Applications:
Hantec TT-998 Silicone Sealant can be used widely in building, automotive,
Package, advertisement and family decorations.
Hantec TT-998 Silicone Sealant also can be used to glaza, seal and fill joints
On the windows, skylight, signs, internal/external fixtures and fitting, doors
And etc.
Applications Limits:
Hantec TT-998 Silicone Sealant is not adapted to structural fitting and
Following situations:
-To all surface that bleed oil, plasticizers or solvents such as wood immersed in oil,
Oil crack filler, and some uncured or sulfurized fat and to surface wher is wet.
-To the substrate that the surface temperatures exceeds +50℃ or apply at the
Temperature below 5℃.
-Use in the manufacturer of IG Units.
-To closed or confined areas where sealant cure may be inhabited by lack of air
(Silicone Sealant needd the water in the air to cure).
-To use in construction or sealing of aquariums.
-To the circumstances as immersed in the water for a long time.
-Shall not be applied on lead, zinc and galvanized steel plate.
-To the painted surface, may cause seal failure as the painr cracking or stripping.
-To the places that easily suffer merchanical clash.
-Use in the IG curtain wall sealing.
- Contact with the Neutral Silicone Sealant.
How To Use:
Application temperature: +5℃~+40℃
-Cleanse with the cleaning agent, to keep the substrate surface completely clean)
-Use the sealant after cleaning agent dries, around 1-2 mins later. You can
Use two different cloth, one for cleaning agent, and another for sealant.(Notice
That the two can't be mixed use together, and the second cloth will be
PRODUCT INTRODUCTION.
better purified cotton and no picking.)
-For better appearance, cover outside of joint area with masking taps before
application.
-Cut nozzle to desired size and extrude sealant to joint areas.
-Tool immediately after sealant application, make it smooth and remove
Masking tape before sealant skins.
Required Testing In the Applications
It is the responsibility if the end uesrs to thoroughly test any proposed use of
The sealant and independently conclude satisfactory performance in the
applications.
Shelf Life:
12 months in unopened package in a cool and dry storage place at the temperature
Between +5℃~+25℃.
Color
Transparent, White, black and gray.