Touch screen electronic access control for standalone
We are manufacturer of access control system,this standalone controller can replace mother board.but it can take any recode.
1.Technical parameters:
NO | ITEM | Parameter |
1 | Operating voltage | DC 12V±10% |
2 | Operating current | < 100mA |
3 | Dimensions | 120mm×78mm×22mm |
4 | Weight | 130g |
5 | Ambient temperature | -10°C—70°C |
6 | Relative humidity | 20%—80% |
7 | Storage | 1000 users |
8 | Card type (alternative) | EM(ID) card(IC card for option) |
9 | Card reading distance | 1-15CM |
2. Factory default settings:
Programming Password | 123456 |
Open Mode | Card or Access PIN |
Output signal time | 5secs |
Backlight | Auto |
Security function | Off |
WG26Port | Input |
3. LED and buzzer indicates:
Two-color LED: red and green:
NO | Led State | Access control status |
1 | light red once every 1 sec (Slow flash) | Holding state |
2 | light red, N.O. | Programming state |
3 | light green within Open time | Unlocking state |
4 | light green once every 0.3sec (Fast flash) | Pending further action |
4. Built-in buzzer:
Description | Status |
1 short buzz | Valid input |
3 short buzz | Invalid input |
1 long buzz | Program success |
Continuous long buzz | Restoring factory programming passwords |
....