DTQ69 series steel plate through type shot blasting machine
Steel Pipe Shot Blast Machine can be used for cleaning casting,forging and welding pieces,remove surface inclusions and oxide skin.
1.Suitable for ship,car,automobile,bridge,etc. industry
2.Cleaning fast
3.PLC control system
4.3D disign and plasma cutting
5.Chamber liner by olling Mn13 steel,at least 2~5 years
Main technical parameters:
Parameter | Cleaning Size (mm) | Cleaning Speed (m/min) | Purposes |
QGW100 | 50-300 | 2-10 | Outer Wall of Shot-blasting Machine |
QGW720 | 159-720 | 2-6 | |
QGW1200 | 219-1016 | 1-6 | |
QGW1500 | 325-1600 | 1-6 | |
QGW2800 | 1016-2800 | 1-2 | |
QGN100 | 50-300 | 1-4 | Inner Wall of Shot-blasting Machine |
QGN700 | 325-720 | 1-2 | |
QGN1000 | 720-1016 | 1-4 | |
QGN1500 | 1016-1500 | 1-4 |
Equipment main structure and characteristics
QG Series Steel Pipe shot blasting machineis consisted of shot blasting chamber, blasting wheel assembly, shot material cycle purify system, roller transmission system, dust removing system, electric control system and so on.
1.Shot blasting chamber
Shot blasting chamber is welded by Q235 steel plate and steel frame. Meanwhile, shot blasting chamber equip testing door, which is the seal space to clean the workpiece. Inside of shot blasting chamber is protected by cast iron protective plate (material ZCr5,thickness 10mm), meanwhile, it is impacted by protective cap.
2.Blasting wheel assembly
Two sides of top shot blasting machine equip two sets blasting wheel assembly. The location of blasting wheel is calculated by computer three-dimensional dynamic simulation. The location and angel are calculated by computer to assure the workpieces completely cleaning.
3.Shot material cycle purify system
It is consisted of screw conveyor, bucket elevator, shot and grit separator, supplying shot sluice valve ,slipping shot pipe and so on.
4.Roller transmission system
Transmission roller consists of charging roller and discharging roller.
5.Dust Collector
It consists of dust collector body, blower, settling tank and pipeline.This equipment takes two grade dust removal, the dust goes through settling tank first, the large grain will fall down through inertia, then large particles will come out by filter cylinder type.
Quality and After-sale Assurance
1. Supplier promise the name, model, specification and quantity comply with technical protocol, assuring the machine is new equipment with qualified material manufactured through perfect technology. There are no defects in design, material and technologies, which is suitable for propose of demander, and meets the standard of national industry. The quality is stable and reliable.
2. Equipment warranty period is 12 months after the final acceptance( except force majeure, inappropriate operation and the quick-wear parts wears).
DTQG series shot blasting machine for steel pipe.
Main accessories parts:
Blasting Wheel:
A.The features of our blasting wheel:
1.This type of shot blasting machine consists of impeller, vane, maru, orientation, the pipe, plate, cover, shaft, motor, etc
2.Motor installation with shot blasting machine adopts the flange on the chamber body, has the high stability, small vibration, etc.Projectile by import tube into the points in round pill, pre-accelerated by directional thrown mouth, after the blade continue to accelerate, in turn, a strong attack to high-speed projectile to the workpiece surface, in order to achieve the purpose of cleaning.
B.The advantages of our blasting wheel:
a) efficient: special points and shot blasting wheel structure, blasting ratio can reach 17.5 kg/min).Kw
b) blade quickly: installation for the shot blasting machine blade is inserted, the impeller center on the effect of centrifugal force in the process of the impeller rotating and fixed blade, so don't need any clamping tools.Removing blade, just tap outside blade side can easily be unloaded from the impeller center leaf.Just 5 ~ 10 minutes, remove the eight leaves, and can check points at the same time the abrasion of wheel and directional set.
c) adopts double disc impeller, good stability, concentrated mass ejection area, uniform blast.
d) in this shot blasting machine blade, maru, orientation, etc., the use of special high chromium wear-resistant cast iron materials, makes the control of blade weight difference within 5 grams, greatly reducing the noise of the shot blasting machine run time (less than 85 db), prolong the service life of wearing parts.
e) beautiful appearance, structure, manufacturing and maintenance.Shot the workpiece surface quality to meet the workpiece after visual inspection and magnetic particle inspection of common criteria.
C .The accessorise of blasting wheel:
1.Reply your inquiry in time.
2. Experienced staffs answer all your questions in time.
3. Customized design is available.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory: We are manufacturer, specializing in producing all kinds of Shot Blasting Machine & Molding Machine & Core Shooting Machine for more than 40 years, competitive with good quality.
7. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature.
If you are interested in this equipment, please don't hesitate to contact us!
If the machine is not suitable for your workpiece, please tell us the following infromation:
1) What kind of workpiece will you clean?
2) The size of workpieces(length, width and height of maximum workpiece,Length, width and height of minimum workpiece?)
3) How many the weight of maximum and minimum workpiece?
4) Please tell us your requirement cleaning efficiency?
According to your infomation, the most suitable machines will be designed for your workpieces.
1. one year warranty for machine and spare parts
2. considerate after-sale service and Technial Assistance and freecharge for installing ,debugging and training
3. world class shot blasting machine and foundry machinery
4. OEM
5. Quick delivery/good quality/ competitive price
6. Free charges for installing,training and debugging.
Certification:
Please don't hesitate to contact us !We look forward to your visiting!