100mm abrasive disc cutting and grinding for stainless steel

Specifications

Factory Advantages

1.Near to raw materials region,low labor costs,so lower production cost,competitive price,

2.Locate in the center of China,low and almost same transport costs to any China main port,

3.Advanced technique,

4.More than 10 years production experience,

5.Strict quality testing,good after-sale service,

6.ISO9001:2000 certificate,

7.Abundant export experience,

8.Accept OEM brand,

9.Small order is accepted,

10.Free samples to test quality. 

Raw Materials

High hardness abrasive:ensure cutting sharp sex

Brown alumina Oxide

High quality reinforced net:ensure the security of cuttin g machine

High quality adhesive resin:ensure good durable performance

Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.

Product:

(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.

Feature:

1.Specially treated Alumina oxide/WA grain for extended life and fast cut,

2.Imported resin bonded makes our disc stronger,

3.Two reinforced fiber glass nets makes our disc more strength,

4.Sharpness,more powerful capacity,

5.Extremely precise and straight cutting,

6.Won''t burn the work piece''s surface,

7.No vibration and no bouncing on work place,

8.Minimum cutting waste,because of small wheel thickness,reduce cutting dust and noise,

9.Lowest power consumption,outstanding service life.

Usage:

Cutting all kinds of steel as stainless steel,alloy steel, mild steels ,constructional steels, hardened iron, steels, concrete reinforcing iron, cast steel,sheet steel,steel bar,steel pipe, grey cast.

Automatic production line:ensure the stability of our products

Performance testing site:

Cutting result  

Cautions:

1.Do visually inspect all wheel before mounting for possible damage.

2.Do make sure operating speed of machine, does not exceed speed marked on wheel,its blotter or container.

3.Do check mounting flanges for equal size,relieved as required and correct diameter. 

4.Do be make sure work rest is properly adjusted on bench,pedestal and floor stand grinder.

5.Do always use safety guard that covers a mimimum of one-half the abrasive wheel.

6.Do allow newly mounted wheel to turn at operating speed,with guard in place,for at least one minute before grinding.

7.Do ture off coolant before stopping wheel to avoid creating an out-of-balance condition. 

Safety Recommendations:

1.Wear protective goggles;

2.Wear protective gloves;
3.Wear ear protectors;
4.Wear dust respirators;
5.Observe safety recommendations.

Packing:

1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.

2.During storage,put the discs horizontally,donot touch the floor directly. 

3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees.