230mm abrasive cutting discs for general steels pipes

Specifications

Factory Advantages

1.Near to raw materials region,low labor costs,so lower production cost,competitive price,

2.Locate in the center of China,low and almost same transport costs to any China main port,

3.Advanced technique,

4.More than 10 years production experience,

5.Strict quality testing,good after-sale service,

6.ISO9001:2000 certificate,

7.Abundant export experience,

8.Accept OEM brand,

9.Small order is accepted,

10.Free samples to test quality. 

Raw Materials

1)T41:T41 flat cutting disc
2)A36#:Aluminium oxide material grit size 36#

High hardness abrasive:ensure cutting sharp sex

3)Q:Hardness grade 

4)B:Combined material "resin"

High quality adhesive resin:ensure good durable performance

Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.

5)F:Fiber glass reinforced

High quality reinforced fiberglass mesh:ensure the product use security

6)80m/s:R.P.M,means meter per second,rotary speed.

Product:

(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.

Feature:

1.First glass WA or ZA raw material with special material;

2.Imported resin bonded makes our disc stronger;

3.Two reinforced fiberglass nets,high strength ensure safety cutting;

4.Sharp,cutting easy, fast ,accurate,high efficiency;

5.Low thermic load,won''t burn the workpiece''s surface;

6.Have good shock and bending strength,no vibration and no bouncing when cutting the workpiece;

7.Cutting the workpiece without demage;

8.low dust production;

9.Low power consumption,long service life.

Usage:

cutting hard metal,like general steels, steel pipes,ferrous metal,aluminium,iron,angle iron,brass, bronze,carbon steel,casting,railway,non-ferrous metal, soft metal,welds,solid materials

Automatic production line:ensure the stability of our products

Part of cutting disc

Cutting site

Cutting result

Cautions:

1.Do visually inspect all wheel before mounting for possible damage.

2.Do make sure operating speed of machine, does not exceed speed marked on wheel,its blotter or container.

3.Do check mounting flanges for equal size,relieved as required and correct diameter. 

4.Do be make sure work rest is properly adjusted on bench,pedestal and floor stand grinder.

5.Do always use safety guard that covers a mimimum of one-half the abrasive wheel.

6.Do allow newly mounted wheel to turn at operating speed,with guard in place,for at least one minute before grinding.

7.Do ture off coolant before stopping wheel to avoid creating an out-of-balance condition. 

Safety Recommendations:

1.Wear protective goggles;

2.Wear protective gloves;
3.Wear ear protectors;
4.Wear dust respirators;
5.Observe safety recommendations.

Packing:

1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.

2.During storage,put the discs horizontally,donot touch the floor directly. 

3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees