AC Drive Servo Motors
1.0Features |
·By using of DSP (digital signal processor) chip;
·Communication with RS485;
·Wide velocity ratio, constant torsion, speed regulation ratio: 1: 5000;
·High speed, high precision, max speed is up to3000rpm, positioning accuracy: 1/10000turn;
·Concise appearance, compact structure;
·Simple to operate, pilot run, surveillance and parameter setting can be handled conveniently just by 4 keys.
Applications |
·CNC Machine: milling machine,engraving machine,spring machine,electric spark,linear cutting etc.
·Electronic Equipment:
Winding machine, wire stripping machine, aluminum battery production equipment,
Fixed-length cutting machine, paper towel machine
dispensing machine
ceramic quipment etc.·Packaging Equipment: filling machine,,diaper producing equipment etc.
·Textile Equipment: flat machine,socks-knitter,curling machine,embroidery machine,spinning machine,knitting machine etc.
·Printing Equipment: screen printer,overprinter,pad printer etc.
Specifications |
Driver Modle | SDA06-MF20 | SDA06-MG30 | |
Power Supply | Three-phase of Single-phase | Three-phase | |
AC220V (-15%~+10%) 50~60Hz | |||
Control System | Use digital AC sine-wave control mode and optimization PID arithmetic to acomplish PWM control | ||
Feedback Signal | Increment encoder 2500P/R with U,V,W signal(Standard) | ||
Position Ouput Signal | Can set multiplying factor of output pulse of output electronic gear, and output mode of Z-phase open collector | ||
Protective Functions | Overcurrent, short circuit, overload, main curcuit overvoltage/under-voltage, regenerative fault, encoder fault, overspeed, and so on | ||
Control Mode | Position control,Speed control,Test run,JOG run | ||
Dynamic brake | Built-in (60W, 40Ω) | ||
Characteristic | Speed frequency | 200Hz or more | |
Speed fluctuation ratio | <0.03 (load0~100%) ; <±0.02 (power-15~+10%) (numerical value correspond to rated speed) | ||
Speed range ratio | 1:5000 | ||
Pulse frequency | ≤500kHz | ||
Input Control Signal | 1Servo-on,2Alarm reset,3Forward rotation torque limit,4Reverse rotation torque limit,5Error counter clear/internal speed selection1,6Pulse command inhibit/speed selection2,7Multi-function input port1,8Multi-function input end2 | ||
Output Control Signal | Servo ready,Servo alarm,Position/speed reached | ||
Position Control | Command pulse type | sign+pulse,CCW+CW pulse,A+B pulse | |
Electronic gear | 1~32767/1~32767 | ||
Feedback pulse | 10000pulse/rev | ||
Speed Control | Speed command/4 internal speed command | ||
Acceleration Control | Parameter setting 1~10000ms/1000r/min | ||
Monitor Function | Motor speed, current position, position command, position offset, motor torque, motor current, linear speed, position command pulse frequency, rotor absolute position, input/output signal etc. | ||
Communication | RS485 | ||
Operation | 6 LED,4 Key stroke | ||
Weight | 2kg | ||
Environment | Temperature | Ambient temp: 0~50°C Storage temp: -20~65°C | |
Humidity | 90%or less (non-condensing) | ||
Altitude | ≤1000m | ||
Vibration | 0.5G or less (4.9m/S2),10~60Hz (no keep running) | ||
Date sheet of AC Drive Motor
Servo Motors' pictures