Electric 25.2V 2A Lithium Battery Desktop Charger For Charging Electronic Car E-Bike Scooter Drones Power Tool
Input Voltage
Table 1: Lists the AC input operating voltage range. The power shall work normally and meet all electrical requirements throughout this range.
Table 1: AC Input Voltage Limitations
| Minimum | Nominal | Maximum |
| 100Vac | 110Vac/220Vac | 240Vac |
Input Frequency
Table 2: List the AC input operating frequency range. The power shall work normally and meet all electrical requirements throughout this range.
Table 2: AC Input Frequency Limitations
| Minimum | Nominal | Maximum |
| 47Hz | 50Hz/60Hz | 63Hz |
Efficiency
The power supply efficiency shall be greater than 80% under rated input voltage. It will be measured at the typical load and maximum load.
Output Specification
DC Voltage Regulation
DC Output voltage regulation limits
Parameter | Line Regulation | Load regulation | Cross regulation |
| V1:25.2V | ±5.0% | ±5.0% | N/A |
DC Output Current
| Parameter | Min Current | Rate Current | Max Current | Unit |
| V1:25.2V | 0.1 | 2 | - | A |
Dielectric Strength Testing
| item | specification | Remark | ||
| Primary to secondary | 1.5KVac | <5mA | No arcing No broken | |
| Primary to P.G | N/A | N/A | ||
Overshoot at turn-on/ turn-off
Any overshootat turn on or turn off shall be less than 150% of rated output voltage.
Over Current Protection
The power supply shall meet the limitation requirement as below table without any damage, the unit shall recover and function automatically after the protection is removed.
Over Current Protection limits
| Parameter | Max | Unit |
| V1:25.2V | 3 | A |
Company show:
About us
We are a professional adapters factory for more than 5 years
Quality control:our defectie products rate is 0.01%
Economically priced, exquisitely made Experience&responsible QC that you can reply on
Adequate supply capacity, Punctual delivery time
Best after sales service are provided
Factory show:
Aging machine:
Production line:
wave soldering machie:
Packing:
FAQ
Q1. Which certificate do you have?
CE,FCC,SAA,PSE,UL,etc.
Q2. What is your payment terms?
Our terms is T/T or Cash. Usual payment terms is T/T 30% as deposit, T/T 70% before shipment.
Q3. Do you inspect the finished products?
Yes, Each step of production and finished products will be carried out inspection strictly by our QC department before shipping. And you will got the inspection test report .
Q4. How do you ship the finished products?
By sea or as your demand.
Contact: